Axion Ind GK5 L15B7 swap Kit - No Turbo

Fits: 2015 Honda Fit (GK5) L15B7

BEFORE ORDERING: This kit will take about 4-8 weeks to ship.  Ktuner is required for the swap, which you can buy through us. If you need a tuner, we recommend going with Derek Robinson at IMW.

NOTE: This was installed and tested on our 2015 Fit. If you want this for another version, please contact us before ordering.

Kit includes:

• Hasport Full Mount swap set 
• Axles for swap 
• Downpipe and Frontpipe RV6 - Frontpipe will need to be notched and welded to work with existing catback exhaust 
• Axion Industries Wiring harness - This will still require some wiring to fully get the car running.  You will still need the 10th gen Civic engine harness 
• Intake MAF housing (depending on your engine (Si or Non Si) with Air filter and Coupler 
• Universal Front mount intercooler - You will need to do some custom intercooler piping. We also include some couplers so you have the right sizes for the piping 
• Intercooler piping - This will work with 50% of the swap and the rest needs to be modified for the Fit chassis 
• Clutch and Flywheel kit - This is very important and why it is supplied, as any stock clutch will fail quickly.
• Shifter you will retain the stock shifter
• Engine/ Trans and Turbo not included

WARNING: Power steering will not usable with this swap. It is also not smog-legal in some States.

This is for the 6-speed manual swap owners only.  This kit will come to you 90% installed - the rest will be finishing up wiring and custom welding. You must source your own 10th gen Civic engine and trans.  We recommend the Si, but if you are on a budget, make sure to get the engine out of anything but the Civic hatch as the rods are much weaker than the L15b7 blocks.

We do not include a turbo with this kit.  If you are looking for a kit with that, we do offer it on our site.  That one includes the RV6 turbo, RV6 downpipe and front pipe, which is the best option to go with as most engines don't come with the turbos.

PRIOR TO SHIPPING: We will email you to verify you have chosen the correct swap kit, as well as identify the urethane stiffness for your setup. 

WARNING: Axion Industries, LLC is not liable for any install. We highly recommend an experience mechanic for this install.